Below are the feature definitions for the selection of the right 3D printer kit. A kit can contain any combination of the below features to suit your needs.
All fumes are extracted from the enclosure and are ducted out to a window with a 50mm diameter duct.
Air is recirculated from the top of the enclosure to the bottom. This mixes the air to keep an even temperature through the whole enclosure.
All fumes which are extracted from the enclosure are passed through a carbon system to remove all the fumes. This is used in cases where fumes cannot be ducted out to a window.
Use the information below to determine which kit suits your needs. Click the "more details" under each image to see the details of the kit and to purchase. Datasheets for the kits can be found in our Technical Data page.
Kit Assembly Guide
The video below illustrates the simple process of assembling a kit and mounting it onto your 3D printer enclosure. Depending on your kit, the components you have will be different, but the approach is the same.