3D Printer Ventilation & Filtration Kit - Small

KIT-2A

This kit features a small Carbon Module for those situations where venting out a window is not possible. The fumes are captured within the Carbon Module so you can enjoy an odour free environment around the printer. The final stage on the kit is the HEPA filter which captures any fine particulate which is generated by the 3D printer before being discharged into the room.

In most setups you will run the fan at 5V for silent operation, but if you need more flow because of large gaps in your enclosure, simply increase the voltage on the power supply! If you use OctoPrint or something similar, you can get more sophisticated and use this system to control the temperature in your enclosure!

Note: The small Carbon Module in this kit is suited for a printer which is used occassionally as the Carbon Module has a limited capacity to capture odours. If you print regularly, purchase the kit with the large Carbon Module.

Technical information for for the fan, Carbon Module and HEPA filter be found on our Technical Data page. 

undefined

undefined